EXHAUST SYSTEM COMPONENTS

The exhausting of flue gases from High Temperature Furnaces and Afterburners requires components designed and built to handle higher than normal exhaust temperatures. Flue gas temperatures from these furnaces can range from 1500°F to over 2000°F.

PACIFIC KILN offers exhaust system components built to withstand high temperatures and severe conditions. The diagram included here illustrates a typical example of a High Temperature Exhaust System.

The individual descriptions of the components will make it easy to put together an exhaust system for virtually any furnace.


RAIN CAPS FOR ROUND EXHAUST PIPE
These rain caps are designed to fit on the round steel exhaust pipe sections listed below. They are constructed of 14 ga. galvanized steel and include four legs with holes for attaching to the exhaust pipe. They come in four sizes to fit our standard pipe.

CAT NO. A B
94100 12" 36"
94105 15" 39"
94106 18" 42"
94107 24" 48"



AIR INSULATED ROOF SLEEVE
These insulated roof sleeves are generally used where the pipe passes through the roof. They provide an air gap to insulate the exhaust gases from the roofing material. Consult local building requirements for applicability in a particular installation, or consult PACIFIC KILN for recommendations for installation if necessary. They are constructed of 14 Ga. galvanized steel. There is a 3" air gap between the inner and outer walls. The overall length is 30". The air insulated length is 24".

CAT NO. EXHAUST PIPE SIZE
A
94200 12"
94205 15"
94215 18"
94216 24"



 


 

 

 



ROUND STEEL EXHAUST PIPE
These sections of pipe are constructed of 14 Ga. galvanized steel. Each section has a collar which allows sections to connect to each other. They have a nominal length of 48".

CAT NO. A
94300 12"
94305 15"
94315 18"
94320 24"



 

 

 

Next page

For more information, email us at
info@pacifickiln.com
Pacific Kiln & Insulations Co. Inc.
14370 Veterans Way • Moreno Valley, CA 92553
Ph: (951) 697-4422 • Fax: (951) 697-4442