PKI FLUIDIZED BEDS

The PKI Fluidized Bed is a simple, yet thorough means of applying stucco to the wet slurry shell. High pressure air is supplied to the bed plenum and is allowed to disperse evenly through the porous stone into the stucco medium thus allowing it to float. The shell is then easily immersed into the stucco medium for coating.

The PKI Fluidized Bed tank is two piece for easy assembly and maintenance. There is a 4″ half coupling on the bottom plenum section for air connection and a 3″ half coupling on the upper tank for medium cleanout. The diffuser stone is available in medium and course porosity. Please specify when ordering.

Air supply (not included) should be a centrifugal blower of at least 2-3 PSI capacity. Compressed air may be used if the volume can be supplied (see chart below). Air supply must be dry and oil free.

MODEL
BED DIA. 
BED DEPTH
TOTAL HEIGHT
REC. AIR FLOW
APPROX. WT.
FBS-18
18″
24″
38″
125 CFM
100 lbs.
FBS-24
24″
30″
44″
220 CFM
125 lbs.
FBS-30
30″
30″
44″
350 CFM
170 lbs.
FBS-36
36″
30″
44″
630 CFM
250 lbs.
 

Diffuser stones are available in a variety of sizes.
Call for quantity prices, shipping weights and minimum order requirements.
All prices are F.O.B. Moreno Valley, CA. Crating not included.